double column high speed machine center SD600 5 axis

DOUBLE COLUMN HIGH SPEED MACHINING CENTER SD600 5 axis

Standard Accessories

  1. CE mark electrical parts
  2. Organ type stainless steel telescopic
  3. Tool change magazine
  4. Tool measurement device
  5. Back flush device
  6. The second story type filter tank
  7. built –in spindle.
  8. full cover.
  9. blowing device for spindle.
  10. spindle coolant system.
  11. auto. Lubrication system.
  1. cutting oil coolant device.
  2. water Gun、side–way air blower,work lamp.
  3. hand-on type operation box / 26PIN hand wheel.
  4. RS232 9PIN INTERFACE.
  5. USB.
  6. heating box.
  7. auto. power of system+alarm lamp.
  8. basis bolt and adjusting screw.
  9. toolbox / operation manual/maintenance manual.
  10. high speed high accuracy function FTP system.

Specification

Model Unit SD600 5 axis
Control CNC controller   Intek/Mitsubishi/Fanuc
Travel
X x X-axis/Y x Y-axis/Z x Z-axis mm 600/600/320
Table top surface to spindle nose mm 80~400
Linear Guideway type (X/Y/Z) mm 45/45/45(THK-Ball type)
Ball screw(X/Y/Z) mm ∅40/ ∅40/ ∅40
Table
Table work surface area (X-axis x Y-axis) mm 600x600
T-Slots (Size x Number x Centre)   18x4x150
Max. work piece weight Kg 500
Feed rate
Rapid traverse rate X/Y/Z m/min 20/20/20
Cutting feed rate mm 1-15000
Minimum input Increment mm 0.001
Spindle
Spindle holder   HSK-E40
Spindle motor Kw 4.6
Spindle speed rpm 24000/30000
Cooling Lubrication   Oil/Grease
A.T.C
Tool magazine capacity T 24
Max. tool weight Kg 1.5
Max. tool length mm 150
Tool selection   Armless
Motors
X-axis drive motors kw 3.5
Y-axis drive motors kw 3.5
Z- axis drive motors kw 3.5
Others
Power KVA 20
Pneumatic pressure Kg/cm² 6
Cutting pump HP 3/4
Coolant tank capacity L 250
Net weight Kg 6500
Floor space mm 2200x2700x2650
Item/model unit PAR-130R
Color   RAL7035
Table Top Diameter   Ø130
Center Height in Vertical mm 220
Overall Length mm 275
Max. Through Hole Diameter   Ø38
Spindle Hole Diameter mm Ø30H7
Width of Guide Slot mm Ø18H7
Width of T-Slot mm 10H7
Tilting Angle Range degree +30o~-120o
Magwetic Valve   AC110V DC24V
Brakeing   Pneumatic
Servo Motor FANUC HF75T HF-154T
Gear Ratio   1:48 1:90
Min. Indexing Unit degree 0.001
Max. Speed of Rotation 200o.p.m 44.4 22.2
Positioning Accuracy sec 60 60
Repeatability sec ±3 ±4
Brake Torque Pneumatic 6kg/cm2 7 30
Hydraulic 35kg/cm2  
Max Load   70
Net Weight kg 120
top