vertical machine center SV7H

Vertical Machine Center-Model SV7H

Machine Features

Specification

MODEL SV7H
CONTROLLER Mitsubishi/Fanuc
MOTOR
X axis Servo Motor KW 1.5
Y axis Servo Motor KW 1.5
Z axis Servo Motor KW 3.5
SPINDLE
Spindle Motor (Cont /30min.) KW/HP 7.5/11(10/15)
Spindle Taper - BT40(BBT40 opt.)
Spindle Type - Direct drive/Built in
Spindle Speed - 10000/(12000,15000,30000 opt.)
TABLE
Table Size mm 850*450
T-slot(width*No.*Pitch) mm 16*3*125
Max. work piece weight kg 200
TRAVEL
X/Y/Z-Axis Travel mm 750/400/500
Spindle Nose to Work Table Distance, Min.-Max. mm 120-620
Spindle Center to Column Surface Distance mm 525
Linear Guideway Type X/Y/Z mm 30/30/35(Roller Type)
Cooling / Lubrication   Oil/Grease
FEED RATE
Rapid Traverse X / Y / Z m/min 30/30/24
Cutting Feed Rate mm/min 1-10000
Min. Resolution mm 0.001
A.T.C.
Max. Tool Length mm 300
Max. Tool Diameter mm ø77/(127)
Max. Tool Weight kg 7
Tool selection - Random
Tool Magazine- Arm type capacity 24
OTHERS
Coolant Tank Capacity L 180
pneumatic Pressure kg/cm2 6
Coolant Motor Power HP 3/4
Coolant Thru Spindle (CTS) - 290Psi (20Bar)
MACHINE SIZE
Machine Net Weight kg 3500
Floor Space of Machine(L*W) mm 2030*2670
Power KVA 25

*Specifications are subject to change without prior notice.

STANDARD

  1. Heat exchanger.
  2. Removable manual pulse generator(MPG).
  3. Enclosed splash guard & Top guard.
  4. FTP& RS-232 interface & USB(Intek).
  5. Automatic power off.
  6. Screw type chip conveyor.
  7. Automatic lubrication equipment.
  8. Work light & Alarm light.
  9. 9.3 Axis telescopic cover.
  10. Wash gun / Air gun.
  11. Swing type operator panel.
  12. Spindle oil cooler.
  13. Chip augers on base.
  14. Rigid tapping.
  15. Bed coolant wash.
  16. Tool kit.

OPTIONS

  1. Flat type chip conveyor and chip bin.
  2. 2.4th, 5th axis control and rotary table.
  3. Coolant through spindle with filter.
  4. Automatic tool length measuring device.
  5. Linear scale.
top