double column high speed machine center SD600

DOUBLE COLUMN HIGH SPEED MACHINING CENTER SD600
video
SAMPLE >

Standard Accessories

  1. CE mark electrical parts
  2. Organ type stainless steel telescopic
  3. Tool change magazine
  4. Tool measurement device
  5. Back flush device
  6. The second story type filter tank
  7. built –in spindle.
  8. full cover.
  9. blowing device for spindle.
  10. spindle coolant system.
  11. auto. Lubrication system.
  1. cutting oil coolant device.
  2. water Gun、side–way air blower，work lamp.
  3. hand-on type operation box / 26PIN hand wheel.
  4. RS232 9PIN INTERFACE.
  5. USB.
  6. heating box.
  7. auto. power of system＋alarm lamp.
  8. basis bolt and adjusting screw.
  9. toolbox / operation manual/maintenance manual.
  10. high speed high accuracy function FTP system.

Specification

Model Unit SD600
Control CNC controller   Intek/Mitsubishi/Fanuc
Travel
 X x X-axis/Y x Y-axis/Z x Z-axis mm 600/600/320
Table top surface to spindle nose mm 80~400
Linear Guideway type (X/Y/Z) mm 45/45/45(THK-Ball type)
Ball screw(X/Y/Z) mm Ø40/Ø40/Ø40
Table
 Table work surface area (X-axis x Y-axis) mm 600x600
T-Slots (Size x Number x Centre)   18x4x150
Max. work piece weight Kg 500
Feed rate
 Rapid traverse rate X/Y/Z m/min 20/20/20
Cutting feed rate mm 1-15000
Minimum input Increment mm 0.001
Spindle
 Spindle holder   HSK-E40
Spindle motor Kw 4.6
Spindle speed rpm 24000/30000
Cooling Lubrication   Oil/Grease
A.T.C Tool magazine capacity T 24
Max. tool weight Kg 1.5
Max. tool length mm 150
Tool selection   Armless
Motors
 X-axis drive motors kw 3.5
Y-axis drive motors kw 3.5
Z- axis drive motors kw 3.5
Others
 Power KVA 20
Pneumatic pressure Kg/cm² 6
Cutting pump HP 3/4
Coolant tank capacity L 250
Net weight Kg 6500
Floor space mm 2200x2700x2650
top