vertical machine center SV11H


Machine Features


Controller Intek /Mitsubishi/Fanuc
Motor x-axis motor kw 3(3.5 opt.)
Y-axis motor kw 3(3.5 opt.)
z-axis motor kw 3.5
Spindle Spindle Motor (Con./30 min) Kw/HP 7.5/11(11/15)
Spindle taper   BT40
Spindle type   Direct drive /built in
Spindle speed   10000(12000,15000,30000Opt.)
Table Table size mm 1250*600
T-slot (Width*No.*Pitch) mm 18*5*100
Max. work piece weight kg 1000
Travel X/Y/Z axis Travel mm 1100/600/600
Spindle Nose to work distance. Min - Max. mm 120-720
Spindle Center to Column surface distance mm 680
Linear Guide type X/Y/Z mm 35/45/45(Roller type)
Cooling/ Lubrication   Oil / Grease
Rapid traverse x/y/z mm/min 30/30/24
Cutting feed rate Mm/min  1-10000
Min. Resolution  mm 0.001
Tool Max. tool Length mm  300
Max. Tool diameter mm  ∅77(127)
Max. tool weight Kg 7
Tool selection   Random
Tool magazine capacity  24/30(Opt.)
Other Coolant tank capacity L 400
Pneumatic pressure Kg/cm 6
Coolant motor power HP 3/4
Thru spindle coolant   290Psi(20bar)
Machine Size Machine net weight kg 7500
Floor space of machine mm 3650*2500
Power KVA 30

*Specifications are subject to change without prior notice


  1. Heat exchanger.
  2. Removable manual pulse generator(MPG).
  3. Enclosed splash guard.
  4. RS-232 interface.
  5. Automatic power off.
  6. Screw type chip conveyer.
  7. Automatic lubrication equipment.
  8. Work light.
  9. Tool kit.
  10. Alarm light.
  11. Swing type operator panel.
  12. Spindle oil cooler.
  13. Bed coolant wash.
  14. Rigid tapping.
  15. Wash gun / Air gun.


  1. Flat type chip conveyer and chip bin.
  2. 4th axis control and rotary table.
  3. Coolant through spindle with filter.
  4. Automatic tool length measuring device.
  5. Automatic workpiece measuring device.
  6. Linear scale.
  7. 30 tools cam type ATC.
  8. 12,000 rpm / 15,000 rpm direct drive spindle.
  9. 15,000 rpm built-in spindle.