double column high speed graphite machine center SD1000G

SD1000G High Speed Graphite CNC Machine

Standard Accessories

  1. CE mark electrical parts.
  2. Organ type stainless steel telescopic.
  3. Tool change magazine.
  4. built –in spindle.
  5. full cover.
  6. blowing device for spindle.
  7. spindle coolant system.
  8. auto. Lubrication system.
  9. side–way air blower，work lamp.
  10. MPG.
  11. RS232 9PIN INTERFACE.
  1. USB/ CF card.
  2. heat exchange.
  3. auto. power of system＋alarm lamp.
  4. basis bolt and adjusting screw.
  5. toolbox / operation manual/maintenance manual.
  6. high speed high accuracy function FTP system.

Specification

Model unit SD1000G
Control CNC controller   Mitsubishi/Fanuc
Travel X x X-axis/Y x Y-axis/Z x Z-axis mm 1000/800/500
Table top surface to spindle nose mm 110-610
Linear Guideway type (X/Y/Z) mm 55/55/55
Ball screw(X/Y/Z) mm 45/45/45
Table Table work surface area (X-axis x Y-axis)       mm  1150x800
T-Slots (Size x Number x Centre)   T18x5x150
Max. work piece weight Kg 1000
Feed rate Rapid traverse rate X/Y/Z m/min 24/24/24
Cutting feed rate mm 1-15000
Minimum input Increment mm 0.001
Spindle Spindle holder   BT-40/HSK-A63
Spindle motor kw 11/15
Spindle speed rpm 10000(12000 opt.)
Cooling Lubrication   Oil/grease
A.T.C        Tool magazine capacity T 24
Max. tool weight Kg 7
Max. tool length mm 300
Tool selection   Random
Motors X-axis drive motors kw 3.5
Y-axis drive motors kw 3.5
Z- axis drive motors kw 3.5
Others Power KVA 30
Pneumatic pressure Kg/cm² 6
Cutting pump HP 3/4
Coolant tank capacity L 300
Net weight   9720
Floor space mm 3710x3040x3250

Dust Collection system

Motor HP 7.5HP TEFC
Air Flow   2500FT³ ³/min
Negative pressure In/H2O 1.26
Max. negative pressure in/H2O 11.5
Inlet   8”x 1 holes
Including mm ∅600mm x 600
Machine floor space (L/W/H) cm 275 x 220 x 265
Collector floor space(L/W/H) cm 120 x 120 x 260
top