vertical machine center SV8H


Machine Features


Controller Intek /Mitsubishi/Fanuc
Motor x-axis motor kw 3(3.5 opt.)
Y-axis motor kw 3(3.5 opt.)
z-axis motor kw 3.5
Spindle Spindle Motor (Con./30 min) Kw/HP 7.5/11(11/15)
Spindle taper   BT40
Spindle type   Direct drive /built in
Spindle speed   10000(12000,15000,30000Opt.)
Table Table size mm 950*500
T-slot (Width*No.*Pitch) mm 18*4*120
Max. work piece weight kg 500
Travel X/Y/Z axis Travel mm 850/500/500
Spindle Nose to work distance. Min - Max. mm 120-670
Spindle Center to Column surface distance mm 595
Linear Guide type X/Y/Z mm 35/45/45(Roller type)
Cooling/ Lubrication   Oil / Grease
Rapid traverse x/y/z mm/min 30/30/24
Cutting feed rate Mm/min  1-10000
Min. Resolution  mm 0.001
Tool Max. tool Length mm  300
Max. Tool diameter mm  ∅77(127)
Max. tool weight Kg 7
Tool selection   Random
Tool magazine capacity  24/30(Opt.)
Other Coolant tank capacity L 250
Pneumatic pressure Kg/cm 6
Coolant motor power HP 3/4
Thru spindle coolant   290Psi(20bar)
Machine Size Machine net weight kg 5500
Floor space of machine mm 2900*2400
Power KVA 30

*Specifications are subject to change without prior notice


  1. Heat exchanger.
  2. Removable manual pulse generator(MPG).
  3. Enclosed splash guard & Top guard.
  4. FTP& RS-232 interface & USB(Intek).
  5. Automatic power off.
  6. Screw type chip conveyor.
  7. Automatic lubrication equipment.
  8. Work light & Alarm light.
  9. 9.3 Axis telescopic cover.
  10. Wash gun / Air gun.
  11. Swing type operator panel.
  12. Spindle oil cooler.
  13. Chip augers on base.
  14. Rigid tapping.
  15. Bed coolant wash.
  16. Tool kit.


  1. Flat type chip conveyor and chip bin.
  2. 2.4th, 5th axis control and rotary table.
  3. Coolant through spindle with filter.
  4. Automatic tool length measuring device.
  5. Linear scale.
  6. 30, 32, 40 tools cam type ATC.