double column high speed graphite machine center SD600G

SD600G Graphite Milling Machining Center

SD600G graphite machine center provides high-speed and precise graphite machining with a built-in spindle and designed plus-minus pressure system & excellent dust proof structure that prevents the inflow of graphite.

In addition, The SD600G has a fully enclosed splash guard that completely seals graphite dust inside to prevent dust leak out. Besides sealing graphite dust, dry machining of carbon fiber and brittle hard power metal is also possible.
Moreover, the low tooling wear and corner high acceleration deceleration make the graphite machining center more applicable to the needs of processors in today's market.

Not only that, SD600G won The National Brand Yusan Award in 2020, which means that the quality of our graphite machining center is performance and high quality for the customer to produce a wide selection of parts for industrial applications.

Below are the features of the SD600G graphite milling machine:

  • A dry-cutting system makes sure dust easily collects. Non-environment pollution problems.
  • All axes coverd telescoping cover to prevent ballscrew and linear guide way
  • Strong negative dust suction system with a close full guard to prevent dust leaks.
  • A positive pressure device in the electric box prevents the dust from entering the system.
  • Continuous machining tolerances from large tool to small tool on surface below 0.01mm
  • Corner rest machining can support up to dia. 0.2mm
  • Machining surface can achieve accuracy of 85% from 3D data surfaces
  • Machining time shorten by 30%

Specification

Model Unit SD600G
Control CNC controller   Intek/Mitsubishi/Fanuc
Travel
X x X-axis/Y x Y-axis/Z x Z-axis mm 600/600/320
Table top surface to spindle nose mm 80~400
Linear Guideway type (X/Y/Z) mm 45/45/45(THK-Ball type)
Ball screw(X/Y/Z) mm Ø40/ Ø40/ Ø40
Table
Table work surface area (X-axis x Y-axis) mm 600x600
T-Slots (Size x Number x Centre)   18x4x150
Max. work piece weight Kg 500
Feed rate
Rapid traverse rate X/Y/Z m/min 20/20/20
Cutting feed rate mm 1-15000
Minimum input Increment mm 0.001
Spindle Spindle holder   HSK-E40
Spindle motor Kw 4.6
Spindle speed rpm 24000/30000
Cooling Lubrication   Oil/Grease
A.T.C
Tool magazine capacity T 24
Max. tool weight Kg 1.5
Max. tool length mm 150
Tool selection   Armless
Motors
X-axis drive motors kw 3.5
Y-axis drive motors kw 3.5
Z- axis drive motors kw 3.5
Others
Power KVA 20
Pneumatic pressure Kg/cm² 6
Cutting pump HP 3/4
Coolant tank capacity L 250
Net weight Kg 6500
Floor space mm 2200x2700x2650

Dust Collection system

Motor HP 7.5HP TEFC
Air Flow   2500FT³ ³/min
Negative pressure In/H2O 1.26
Max. negative pressure in/H2O 11.5
Inlet   8”x 1 holes
Including mm ∅600mm x 600
Machine floor space (L/W/H) cm 275 x 220 x 265
Collector floor space (L/W/H) cm 120 x 120 x 260

The standard accessories of the SD600G graphite machining center :

  1. CE mark electrical parts
  2. Organ-type stainless steel telescopic
  3. Tool change magazine
  4. Tool measurement devices
  5. Back flush device
  6. The second story type filter tank
  7. Built-in spindle
top